John Berends Implements
Extra Heavy Duty EHD Range
Rugged Slasher Built Extra Tough For Contractors
2 Models | 1750–2050mm (69–81") | Suits 60hp+
From
$8,668
Inc. GST
Pickup Or Delivery
Stock: Enquire Online

Description

The John Berends Implements Extra Heavy Duty EHD Range is a rugged, extra tough slasher built to take real punishment from continuous work. Australian made using high quality European components. The John Berends Implements Extra Heavy Duty EHD Range is ideal for contractors.  A full five year warranty for the Italian made gearbox is included.

The EHD slasher is available in two different configurations – the standard model, and a ‘Contractor’ package, that adds an additional runner for wear, a galvanised body, bolt head protection and a dual wheelkit with solid, puncture-proof tires.

Application

Continuous heavy duty slashing, especially contractor work.

Features

  • Extra strong build 6mm top plate with exceptionally strong perimeter and centre tubular crossmembers – where it counts.
  • Adjustable skids. Contractor option fitted with ‘additional’ runner for wear.
  • Two-pack paint finish. Contractor option has hot dipped galvanised body.
  • Headstock made from heavy angle and RHS and fitted with floating (toggle) top link. Optional chain stays available.
  • Bondioli & Pavesi (Italian) Series 8 pto driveshaft with integrated 4 plate slip clutch protects slasher and tractor. An integrated clutch means less wear between the clutch and pto shaft.
  • 110 HP oil lubricated Italian Comer gearbox with 1:1.5 ratio and excellent seal protection with 5 Year Manufacturers Warranty.
  • Straight reversible 100 x 12mm Boron slasher blades are standard with stepped configuration as an option. All bushes are through hardened. Made in Australia, the blades are hardened and tempered in the 40-45 Rockwell range. This range gives excellent hardness while delivering strength and fatigue resistance. Any harder and they potentially become brittle.
  • Hardened and tempered spring steel rotor blade assembly. Bolt head protection on contractor option allows easy changeover of blades.
  • Dual puncture proof solid rubber wheelkits enable easy depth control. Standard with contractor option.
  • Front and rear chain kits are standard with easy to replace chain pieces.

Models

0094 – EHD180 (5’10”) Slasher, Adjustable Skids
0087 – EHD180 (5’10”) Slasher, Adjustable Skids Offset
0083 – EHD180 (5’10”) Slasher ‘Contractor’ Package
0097 – EHD210 (6’9”) Slasher, Adjustable Skids
0089 – EHD210 (6’9”) Slasher, Adjustable Skids Offset
0084 – EHD210 (6’9”) Slasher ‘Contractor’ Package

Specifications

EHD180
Cutting Width – 1750mm
Overall Width – 1960mm
Tractor Power Required (Approximate) – 60hp+
Cutting Height – 25-100mm
Weight – 600kg

EHD210
Cutting Width – 2050mm
Overall Width – 2200mm
Tractor Power Required (Approximate) – 75hp+
Cutting Height – 25-100mm
Weight – 635kg

Warranty

12 months on design and manufacture
5 years on gearbox


Manufacturer’s Website

John Berends Implements – www.johnberendsimplements.com.au


Have a question about this product? Call or visit our stores or enquire online.