Our Products

HR500 and HR600
Brand New Designs Developed From The Ground Up
Turbo Diesel | 4WD | 118", 129" and 137" | Cab or ROPS
Pickup Or Delivery
Stock: Enquire Online


The Jacobsen HR500 & HR600 have been developed from the ground up as a new generation of adaptable and practical wide area mowers. Delivering productivity on all fronts, the Jacobsen HR500 & HR600 are highly manoeuvrable, engineered for reduced downtime and produce the widest width of cut in their class. The first in a range of wide area mowers, the HR500 and HR600 are designed with high strength steel throughout, reducing overall weight where possible to make best use of their available power. A range of engines, control systems and cutting widths are available to give options for all budgets and working conditions.


  • Rugged and reliable Kubota® engines deliver power direct to the efficient hydraulic system
  • Lift and lower individual decks or run all three at a maximum width of cut to suit your needs
  • Turn on the spot within the cutting width to effortlessly mow back and forth
  • Zero maintenance direct drive decks mean less time greasing, no adjusting belts and more time out at work
  • Immediate hood access for daily checks and quick-release side panels for more thorough servicing make working on the HR series effortless
  • ISO mounted platform and full suspension seat offers operators unparalleled comfort and higher levels of productivity
  • Excellent seating position for an unobstructed view all around the mower whether cutting or in transport
  • With a transport width within the front deck, this mower will go places others simply can’t go
  • Low weight of 1697 kg (HR500) means lower impact on fragile turf

Standard Equipment – HR500 and HR600

  • Foldable ROPS
  • 3.8” Display screen
  • Tilt steering wheel
  • 4 point tie down
  • Fully adjustable suspension seat
  • Fully sealed maintenance free rear axle

Additional Features of the HR600

  • Cruise control
  • Adjustable travel speeds
  • Advanced onboard engine and electronic diagnostics
  • Quick select manual, auto and creep drive modes


HR500 Cab
HR600 Cab


Type – Kubota V2403-CR-TE4 4-cyl, liquid cooled, turbo diesel
Rated Horsepower – 48.5 kW @ 2700rpm
Emission Level – EU Stage IIIB- (EPA Tier 4 Final)
Cooling System – Side-by-side radiator/hydraulic oil cooler; pressurized; 7.6 l capacity, 8.5 fins per inch
Fuel Capacity – 77.1 l
Electrical System – 12-volt, input/output controller. 45/60 amp alternator. Overload protection with automotive type fuses.

Traction and Drive
Traction System – Hydrostatic closed loop parallel cross series SureTrac system; variable displacement piston pump; front high torque fixed displacement piston wheel motors; full time auto 4WD fwd, on demand in reverse.
Deck Drive – Seven individual hydraulic motors with self lubricating integral bearings
Hydraulic System – 50.2 l capacity reservoir, O-ring face seal fittings, 10 micron remote charge filters, suction screen at tank, oil cooler side by side radiator, diagnostic test ports.

Tires, Brakes, and Steering
Front Tires – 26 x 12-12 tubeless 8 ply
Rear Tires – 20 x 10-8 tubeless 6 ply
Service Brakes – Dynamic through traction system
Parking Brake – Wet parking brakes integrated into wheel motors
Steering – Q-Amp® Variable rate, hydrostatic powered equal displacement cylinder to rear wheels

Decks and Cutting Units
Number and Size – One 1.52 m (60 in.) front deck; Two 0.9 m (35 in.) or 1.03 m (40 in.) or 1.12 m (44 in.) impact absorbing wing decks
Caster Wheels – Six, 9 x 3.5 – 4. Smooth, semi pneumatic puncture proof, sealed precision ball bearings
Weight Transfer – On demand electrically operated hydraulic weight transfer system
Height of cut – 25-120 mm (1 – 4.75 in.) in 6.5mm (0.25 in.) increments; tool-less adjustment
Cutting Capacity – At 12 kph (7.5mph): 3.24 ha/hr (8.0 acres/hr)
Cutting Capacity – 3.56 ha/hr (8.8 acres/hr)
Cutting Capacity – 3.89 ha/hr (9.6 acres/hr)
Overall Cutting Width – 3.0 m (118”) or 3.28 m (129 in.) or 3.48 m (137 in.)
Deck Lift/Lower – Fingertip operated joysticks for individual deck lift/lower; cross cut position; front deck service position with lock pin. Electronic safety locks.
Deck Construction – Bull nose pro_ le, high strength, low weight steel construction. Solid bumper rails, bolted assembly of all impact and wear parts

Mowing – 12 km/h variable
Transport – 25 km/h variable
Reverse – 6.4 km/h variable

Weight and Dimensions
Weight – 1769 kg (3900 lbs); 1976 kg (4356 lbs) with cab
Length – 3.62 m (143 in ) Front deck down
Height – 2.11 m (83 in.) ROPS Up; 1.70 m (67 in.) ROPS & Decks Down; 2.2 m (57 in.) with cab
Transport Width – 1.65 m (65 in.) at 50 mm (2 in.) height of cut
Accessories – Road lighting kit, beacon, Tilt Sensor Technology (TST), air suspension seat, puncture resistant tyres, air-conditioned cab

Manufacturer’s Website

Jacobsen – www.jacobsen.com

Have a question about this product? Call or visit our stores or enquire online.



Product Brochure