Our Products

Jacobsen
LF510
Newest Mower In LF Range - Affordable And Tier 4
Diesel | 2WD or 4WD | 100" Cutting Width
Pickup Or Delivery
Stock: Item Available

Description

The newest addition to Jacobsen’s legendary line of LF mowers, the LF510 provides superior quality-of-cut, fits the budget and is a simple Tier 4 Final emission regulation solution.

Features

  • Features Jacobsen’s new TrueSet cutting units with Classic XP reels for fast bedknife-to-reel adjustment and industry-leading holding power to deliver a clean and consistent quality-of-cut
  • The lightweight mower design distributes less than 10 psi of operating ground pressure on the turf
  • Affordability from the start and through its life with 100 in. (2.54 m) of productivity and simplified maintenance including wet park brakes, an onboard control module, and easily accessible routine service items
  • Powered by a rugged and reliable Kubota Tier 4 Final engine for simple emission compliance

Models

LF510 2WD
LF510 4WD

Specifications

Engine
Type – Kubota® D1105E 3-cylinder, liquid cooled, low-emissions certified diesel
Rated Horsepower – 18.6 kW @ 3000 rpm
Emissions Level – EPA Tier 4 Final (EU Stage IIIA)
Displacement – 1.12 L
Air Cleaner – Dry cartridge type with evacuator, valve and service indicator
Cooling System – Pressurized, sealed cooling system
Lubrication – Fully pressurised
Fuel Capacity – 64.4 L
Oil Filter Type – Full-flow, replacement spin-on type
Electrical System – 0.8 kW starter; 40 amp alternator/regulator

Speed (Maximum)
Mowing – 12.9 km/h
Transport – 16 km/h
Reverse – 6.4 km/h

Traction and Drive
Traction System – Variable displacement, hydrostatic pump with 2 high-torqued wheel motors; 4WD models: SureTrac™ parallel-cross-series traction system
Reel Drive – Gear pump with quick disconnect (FlashAttach) coupled reel motors, solenoid controlled mow valve; backlapping standard. Mow Speed Limiter: Foot Activated Lever
Hydraulic System – 53 L capacity; oil monitor with low-oil alarm standard
Reel Lift – Joystick control, one-touch lift/lower control for all five reels
Hydraulic Cooling – Hydraulic oil cooler; large-volume, full-flow 10 micron filter

Tires, Brakes, and Steering
Front Tires – 26.5 x 14.0-12 tubeless
Rear Tires – 20.0 x 10.0-8 tubeless
Brakes – Dynamic, through-traction system
Parking Brake – Automatic wet park brake integrated in front wheel motors; engage switch on control console
Ground Pressure – 0.7 kg/cm²
Steering – Rear-wheel, hydrostatic power steering

Reels and Blades
Number and Size – Five 12.7 cm diameter x 55.9 cm
Number of Blades – 7 heavy section fairway blades
Cutting Frequency – 7 blade: 1.88 mm/km/h
Overall Cutting Width – 2.54 m
Height-of-Cut Range (Depending on turf condition, reel wear and bedknife installed) – 9.5-19.0 mm (Available high-cut kit raises cutting height to 30.2 mm)

Controls
Diagnostics: Onboard electronic control module with light-emitting diode display and alarms for aid in diagnostics.
Gauges: Fuel gauge, hour meter, and indicator warning lights: diagnostics list, glow plug indicator high engine coolant temperature, engine oil pressure, and battery voltage.

Weight and Dimensions
Weight with Reels Up – 2WD without ROPS: 1177 kg
Weight with Reels Up – 2WD with ROPS: 1242 kg
Weight with Reels Up – 4WD: 1278 kg
All weights are with full fluids
Weight with Reels Down – 2WD without ROPS: 893 kg
Weight with Reels Down – 2WD with ROPS: 970 kg
Weight with Reels Down – 4WD: 995 kg
All weights are with full fluids, weight at tires for ground pressure
Length (less catchers) – 2.74 m
Height – 2.23 m with ROPS; 1.49 m to top of steering wheel
ROPS optional for 2WD, application specific. 4WD: ROPS standard with seat belt.
Width – 2.92 m
Width – Transport: 2.2 m


Manufacturer’s Website

Jacobsen – www.jacobsen.com


Have a question about this product? Call or visit our stores or enquire online.

DOWNLOADS


Product Brochure